TEL
81-78-335-7573
MENU
SEARCH

PS200-NG

Overview
The Montronix power sensor PS-200-NG measures the input of effective electrical power of spindle and axle drives with the highest possible resolution. The power signal provided is perfectly suited for monitoring when combined with a Montronix IBU-NG.

The PS200-NG can be used with direct current motors as well as with one- or three-phase AC motors. Via current and voltage, the PS200-NG determines the input of effective power and creates a corresponding analog output signal. A multitude of amplification and filter settings are available to optimally adapt the output signal to the respective drive and process. In combination with a Montronix IBU-NG system, they can be individually set for each tool.

The PS200-NG thus offers a robust solution for monitoring tool breakage, wear and missing tools independent of the control system being used.
Applications:
・Monitoring of feeder and spindle drives
・Detection of broken tools
・Detection of tool wear
・Detection of missing tools
・Detection of first cuts/gates

Production Systems:
・Used in machining and transfer centers, with lathes, custom machines, and for montoring of all kinds of drives.

Movie

Specs

Technical specifications
Sensor type Power sensor
Protection class IP67
Temperature range Operation -20 to 70 °C / Storage -20 to 85 °C
Relative humidity 0 bis 95 % non-condensing
Diameter cable leadthrough 60 mm
Certifications CE
Voltage supply ±12 V to ±15 V ±5 %
Output current 100 mA
Output current accuracy ±1 %
Output linearity ±0.25 %
Response time ≤ 1μs @ di/dt = If /μs
Hysteresis allowance ≤ 0.3mA (0A ↔ If)
Maximum current @70 ºC VCC=±15 V ±300 A @ RM=30 Ω
Rated current 200 AT
Connection PUR cable with M8 3-pin male plug
Material Insulated plastic case according to UL94V0
Contact us

Sensor