TSSG1-DGM

Overview: The single-channel Montronix TSSG1-DGM force amplifier is used in combination with a Montronix RetroBoltSG-Mxx force sensor. The Montronix SPECTRA™ central unit controls the TSSG1-DGM via a serial interface. Amplification, filter and time constant can hereby be set individually. These settings are individually available for each tool, rapid feed function, and tool change.

There are two analog signal outputs. In order to be evaluated by the processor unit, the TSSG1-DGM amplifier divides the force signals into a static and a dynamic part. Since the sensor is really based on strain gauge measurements, this specific Montronix sensor technology is especially suited for long cuts and rapid process changes.

Applications:
・Turning centers
・Machining centers
・grinding centers
・Transfer lines
・Custom machine
・Presses / Riveting machines

Specs

Technical specifications
Dimensions (HxWxD in mm)	35 x 153 x 65
Weight with cable	approx. 320 g
Housing	Aluminium
Protection class	IP66
Temperature range	Operation: 0 bis 60 °C / Storage: -40 bis 100 °C
Relative humidity	0 bis 95 % noncondensing
Mounting	two M4 screws
Gain	1, 2, 4, 8, 10, 20, 40, 80, 100, 200, 400, 800
Gain error	± 2 %
Output signals	0..10 V DC: Dynamic part (RMS) ±10 V DC RAW and DIAG output
Connections	PG9 and sensor-specific
Current consumption	90 mA @ +15 V DC, -20 mA @ -15 V DC
Sensor inputs	1
Sensor type	RetroBoltSG
Voltage supply	±15 V DC
Certification	CE